PIGEON
Pigeon Induction Cooktop Troubleshooting
5 error codes with step-by-step fixes, safety warnings, and Amazon tool links.
5
Error codes
12 min
Avg. fix time
100%
Beginner-friendly
18
FAQs answered
About Pigeon induction cooktop error codes
This hub covers every Pigeon induction cooktop fault code we’ve documented — 5 error codes with step-by-step fixes, safety warnings, and links to the exact tools on Amazon.in. Each guide is cross-referenced with the Pigeon India service manual and verified against common failure patterns reported across Indian households.
Most Pigeon induction cooktop errors (100%) are beginner-level fixes that don't require a technician — basic tools and 10-20 minutes are usually enough. The average fix takes about 12minutes. Every guide includes a “when to call a technician” section so you know exactly where the DIY boundary is.
The most common fault pattern across Pigeon induction cooktops in India is sensor fault, accounting for 2 of the 5 error codes we cover. If your induction cooktopis showing this symptom but you’re not sure which error code it is, browse the list below and match the description to your situation.
All error codes
Error E0 on Pigeon induction cooktops (by Stovekraft) means the cooktop's vessel detection sensor cannot find a compatible ferromagnetic vessel on the cooking surface.
5 min · skill: beginner
Error E1 on Pigeon induction cooktops (by Stovekraft) indicates the input voltage has dropped below the minimum safe operating threshold — approximately 160V–180V depending on the model.
10 min · skill: beginner
Error E2 on a Pigeon induction cooktop indicates the glass-ceramic surface has exceeded its safe temperature threshold (usually around 280°C).
15 min · skill: beginner
Error E6 on Pigeon induction cooktops indicates the internal temperature sensor has detected heat exceeding the safe operating limit — typically above 240–280°C for the ceramic glass surface or 90–100°C for the internal electronics.
20 min · skill: beginner
A Pigeon induction cooktop that shows no display and does not respond to any button press could have several causes — a tripped power supply, activated child lock, a blown internal fuse, or a failed control board.
10 min · skill: beginner